DIY Metal Wire Bertoia Counter Stool
Bertoia counter stool – A metal wire chair can add a sleek and modern look to the decor in the kitchen or living room. Set the chair that you will do to either borrow an existing design or preparation of your own style. Measure the wire to be cut for your counter stool. The cutting wire to be used for the frame of the seat and backrest of your chair, using a wire snips.
Bend wire gently in one direction until it is in line with the desired shape of your chair style. Solder ends of the wire frame together by means of a soldering gun and brazing wire. Cut wire for the middle and back of your bertoia counter stool, using metal clips. Solder one end of the wire to metal seat or backrest frame and then loop wire around the other end of the frame and back to the point where you soldered other end of the cord.
Weave extra pieces of metal from front to back on the seat, or from top to bottom at the back of the chair. Merging these pieces between the first set, which you used to get the chair started. Solder seat and back of the chair together. Create a base for your Bertoia counter stool.